Trending

News

  • 0
  • 0

Deterioration of superplasticizer

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Since the beginning of this year, people around the world have felt the pressure of rising prices. Not only the rise in oil prices but also different industries have seen soaring prices. According to the latest data, from August 2021 to the present, the inflation rate in the United States has risen for 6 consecutive months, and this data has soared from the previous 5.3% to 7.9% today. Inflation in the United States, the global Many countries have been affected.
According to experts' forecasts, the inflation rate in the United States may exceed 10% this year, which will face the danger of collapse, which has a great impact on global inflation, including pce powder.

Polycarboxylate superplasticizer is the third generation of high performance superplasticizer after common superplasticizer and superplasticizer. Compared with other kinds of superplasticizer, it has the advantages of strong molecular designability, high water reduction rate, good slump retention, low content of chloride and alkaline substances, and no pollution in production and use. In practical application, polycarboxylate superplasticizer is often compounded with a small amount of defoaming components, retarding components, air entraining components, viscosity modified components, etc., in order to meet different technical performance requirements of concrete.

 

The combination of sodium gluconate or sucrose as retarding component and polycarboxylate superplasticizer can increase the water reducing rate and slow down the slump loss of concrete to a certain extent, and improve the adaptability of superplasticizer and cement. But at the same time, polycarboxylate superplasticizer products often deteriorate quickly due to the addition of sodium gluconate, light performance is reduced, heavy is completely ineffective, bringing many uncertain factors to engineering use or directly leading to engineering accidents, this problem will be more serious in high temperature weather.

 

Phenomena and causes of deterioration of polycarboxylate superplasticizer:

At the initial stage of deterioration of polycarboxylate superplasticizer, there were light-colored fluffy or cotton floc-like plaques on the liquid surface, and then developed into discrete bulk floats, and strings of bubbles appeared from time to time.

 

When the deterioration is serious, the plaque will cover the whole liquid surface, showing thick green, brown and black suspended matter in the solution, accompanied by the formation of rotten sour gas. This deterioration is mainly caused by mildew.

 

The mildew of polycarboxylate superplasticizer is also related to its storage environment. Improper storage conditions, such as serious temperature rise in the storage space, not ventilated and humid, lead to the melting of large monomers, and the local temperature of the monomer is too high. Higher temperature will aggravate the movement of macromolecular chains. Once the dissociation energy of chemical bonds is exceeded, chain decomposition, irregular fracture and thermal decomposition will occur, resulting in faster deterioration of polymers. Similarly, the higher the temperature, the greater the activity of microorganisms, and the faster the mildew rate of superplasticizer.

 

Concrete Additives Supplier

TRUNNANO is a reliable concrete additives manufacturer with over 12-year experience in nano-building energy conservation and nanotechnology development.

If you are looking for high-quality concrete additives, please feel free to contact us and send an inquiry. (sales@cabr-concrete.com)

We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.


Gas prices in European countries are expected to triple if Russian supplies are restricted, according to a press release from Rystad Energy, a Norwegian Energy consultancy.  

The price of natural gas in Europe was $1,200 per 1,000 cubic meters on Tuesday. The benchmark price is already 300 percent higher than a year ago. European gas prices are expected to continue to soar to $3,500 per 1,000 cubic meters if Russian supplies are restricted, according to Analysis by Monitor.

In 2021, Russia delivered 155 billion cubic meters of gas to Europe, accounting for 31 percent of its gas supply, according to an analysis by Monitor Advisors. It would be difficult for Europe to replace Russian gas, which would also destabilize the global LNG market and have a profound impact on Europe's population and economy.

The analysis also said that if Russia stopped supplies now, Europe's current gas reserves would be exhausted by the end of the year, setting in for a cold winter.

In addition, affected by the geopolitical factors, the supply of the pce powder is erratic and thus its prices are expected to go higher in the future.

Inquiry us

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Tungsten alloy heavy plate has low thermal expansion. It is also known for its high density, high thermal conductivity, and radiation absorption. It is used widely in the aerospace and medical industries. About Metal Alloy 18.5g/cm3 Polished Tungst…

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

W-Ni - Cu alloy is used in the production of Tungsten alloy balls. It is widely utilized in the fields of aviation, oil drilling, military and aerospace. High Density Tungsten Alloy Metal Ball, 18g/cm3 Diameter: 1.0mm-150.0mm Surface: sinter…