News

  • 0
  • 0

How is titanium carbide made?

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



Russian President says if the European Union imposes an oil embargo, Europe will buy energy at the most expensive price and economic activity in Europe will weaken. Rosneft needs to change its business model. Russia will help facilitate settlement and access to loans and insurance in its own currency.

According to Reuters, the European Commission will unveil a 210 billion euro plan on how Europe can end its dependence on Russian fossil fuels by 2027 and use its distance from Moscow to accelerate a shift to green energy. According to a draft document seen by Reuters, Brussels will propose a three-pronged plan to wean countries off Russian fuel: switch to importing more non-Russian gas, move more quickly to promote renewable energy, and work harder to conserve energy. The draft measures, which include EU law, non-binding plans, and possible recommendations by national governments, are subject to change before publication.

Austria is not a member of NATO and will not seek membership in the future, the Austrian Foreign Minister said in Brussels recently. He stressed that it was "their choice" for Sweden and Finland to seek NATO membership, while Austria would remain neutral.

The supply and prices of many other titanium carbide are expected to continue to be influenced by international situations.

Carbothermal reduction method
TiO2 is reduced by carbon black. The reaction temperature range is 1700-2100℃. The chemical reaction formula is as follows:
TiO2 (s) + 3C (s) = TiC (S) + 2CO (g).
 
Direct carbonization method
Ti powder reacts with carbon powder to form TiC. The chemical reaction formula is as follows:
Ti (s) + C (s) = TiC
Because it is difficult to prepare submicron metal Ti powder, the application of this method is limited, the above reaction can be completed in 5-20 hours, and the reaction process is difficult to control, and the reactants agglomerate seriously, so it needs further grinding to prepare fine TiC powder. In order to obtain a purer product, the fine powder after ball milling needs to be purified by chemical method.
 
Chemical vapor deposition
The synthesis is based on the reaction between TiCl4, H2, and C. The reactant reacts with the hot tungsten or carbon monofilament, and the TiC crystal grows directly on the monofilament. The output and sometimes even the quality of the TiC powder synthesized by this method are strictly limited. In addition, due to the strong corrosiveness of TiCl4 and HCl in the product, special caution should be taken in synthesis.
 
Sol-gel method
The invention relates to a method for preparing small particle size products by fully mixing and dispersing materials with the help of solution. It has the advantages of good chemical uniformity, small particle size and narrow distribution, low heat treatment temperature, but complex synthesis process and large drying shrinkage.
 
Microwave method
Using nano-TiO2 and carbon black as raw materials, the material was heated by microwave energy based on the principle of carbothermal reduction reaction. In fact, using the dielectric loss of the material in the high frequency electric field, the microwave energy is converted into thermal energy, and the nano-TiO2 and carbon are synthesized into TiC.
 
Explosive impact method
Titanium dioxide powder and carbon powder were mixed in a certain proportion, and the precursor was prepared by pressing into a Φ 10mm × 5mm cylinder with a density of 1.5g/cm3, which was packed into a metal confined outer cylinder in the laboratory. The experiment was carried out in a self-made airtight explosion container, and the detonation ash was collected after the action of explosion shock wave. After preliminary screening, large impurities such as iron shavings are removed to get black powder. The black powder turned brown after being soaked in aqua regia for 24 hours, and finally put into muffle furnace and calcined 400min at 400℃ to get silver gray powder.
 
High frequency induction carbothermal reduction method
The pigment grade titanium dioxide powder and charcoal powder were weighed and mixed at 1:3 and 1:4, then added to the ball milling tank and milled for 6 hours on a planetary ball mill at a rotational speed of 300~400r/min, then the ball milling material was pressed into a 2cm × 2cm~2cm × 4cm block on a pressing machine, and finally the material was loaded into a graphite crucible and put into a high frequency induction heating equipment. Argon gas was used to protect the atmosphere. Gradually adjust the current of the high-frequency induction equipment to 500A to make the material have carbothermal reduction reaction and keep 20min. After the heat preservation, the reduction product is naturally cooled to room temperature in argon atmosphere, and the reduction product is taken out. After grinding and crushing, the ultra-fine titanium carbide powder is obtained.
 
Metal thermal reduction method
The solid-liquid reaction method is an exothermic reaction, so the reaction temperature is low, the energy consumption is low, but the raw material is more expensive, and the CaO and MgO in the product are pickled and can not be recycled.
 
High temperature self-propagating synthesis
The SHS method is derived from exothermic reaction. When heated to a proper temperature, the fine Ti powder has very high reaction activity, so once ignited, the combustion wave generated through the reactants Ti and C will have enough heat of reaction to form the TiC, SHS method, usually less than a second. The synthesis method requires high purity and fine Ti powder as raw material, and the output is limited.
 
Reaction ball milling technique
Reactive ball milling is a technology to prepare the required materials by using the chemical reaction between metal or alloy powder and other elements or compounds in the process of ball milling. The main equipment for preparing nanomaterials by reactive ball milling technology is high energy ball mill, which is mainly used to produce nanocrystalline materials. The mechanism of reactive ball milling can be divided into two types: one is mechanically induced self-propagating high temperature synthesis (SHS) reaction, and the other is reactive ball milling without obvious exothermic reaction, and the reaction process is slow.
 
Titanium carbide Price
The price is influenced by many factors including the supply and demand in the market, industry trends, economic activity, market sentiment, and unexpected events.
If you are looking for the latest Titanium carbide TiC price, you can send us your inquiry for a quote. (sales3@nanotrun.com
)
 
Titanium carbide Supplier
Luoyang Tongrun Nano Technology Co. Ltd. (TRUNNANO) is a trusted Titanium carbide manufacturer and TiC supplier with over 12-year-experience. We ship our goods all over the world.
 
If you are looking for high-quality Titanium carbide powder, please feel free to contact us and send an inquiry. (sales3@nanotrun.com
)
 

Europe's immediate goal of reducing its dependence on Russian gas in response to the conflict with Ukraine presents a rare opportunity for the United States, the world's largest gas producer. America's LNG exporters have made a fortune this time. Investors are bullish on the future of natural gas, as evidenced by the recent record high share price of Energy company Chenier.  

But the outlook for more than a dozen new LNG projects is highly uncertain as construction costs rise, US gas prices soar and climate policymakers seek to move away from a long-term reliance on fossil fuels. Even the most advanced projects can take years to become operational.  

Currently, the total U.S. LNG titanium carbide are expected to continue to rise in the future.

Inquiry us

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Tungsten alloy heavy plate has low thermal expansion. It is also known for its high density, high thermal conductivity, and radiation absorption. It is used widely in the aerospace and medical industries. About Metal Alloy 18.5g/cm3 Polished Tungst…

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

W-Ni - Cu alloy is used in the production of Tungsten alloy balls. It is widely utilized in the fields of aviation, oil drilling, military and aerospace. High Density Tungsten Alloy Metal Ball, 18g/cm3 Diameter: 1.0mm-150.0mm Surface: sinter…