Products

  • 0
  • 0

Global foam concrete,foaming agent,concrete curing agent market trend 2024-2026 What are the effects of admixtures on foam concrete by Newswgraj

A recent poll in Britain found that public support for sanctions against Russia is falling as fuel and prices rise.  

The proportion of people willing to accept higher fuel prices as a result of western sanctions against Russia fell 14 percentage points to 36% from 50% in March, according to a survey conducted for the Telegraph by consultancy Redfield & Wilton Strategies.  

Global energy and fuel prices have soared since the start of the year and remain high because of the conflict between Russia and Ukraine and uncertainty over Russian supplies.  

The survey also found that 54% of people believe their own financial situation has worsened in the past year, up 12 percentage points from 42% two months ago. Sixty-two percent think things will get worse in the year ahead. Less than a third of respondents said they had received a pay rise to keep up with inflation, with two-thirds of those saying it was not enough to keep up with rising living costs.  

The figures suggest that public concern about the conflict with Ukraine is now likely to be overtaken by financial worries.  

Separately, the UK's consumer price index rose 7 percent this month from a year earlier, the highest since March 1992, according to figures released recently by the Office for National Statistics. In addition, a separate report released a few days ago by the Centre for Economics and Business Research said that real household disposable income in the UK will fall by 3% in 2022, equivalent to a loss of £2,320 per household, which would lead to the biggest drop in living standards since the 1950s. That is mainly because wages aren't keeping up with rising energy and fuel costs.  

The prices of other commodities like the foam concrete,foaming agent,concrete curing agent are also expected to be influenced.

To study the problem of collapse mode cracking in the cast-in-place foam concrete wall, using ordinary Portland cement, fly ash, and self-made composite foaming agent as the primary raw materials, the admixtures (there are two kinds of admixtures) were studied through single-factor experiments. One is a foaming agent, and the other is concrete curing agent.


According to the characteristics of the foaming agent that the foam pore size can be adjusted freely, and the preparation is atomized and diluted during use. The pore size is more acceptable and uniform (the pore size is less than 1mm). The light foam and slurry are mixed to make a lightweight concrete microporous slurry. The porosity in the slurry accounts for 70% of the total volume of the foamed concrete. The foams in the slurry are closed by a water film. They are not connected, which improves the problem of high water absorption in traditional concrete and improves the frost resistance and impermeability of foam concrete. It has a specific activation effect on fly ash. 


The slurry in the pouring and forming stage has self-leveling characteristics, good pore structure, smooth entry into the mold, and rapid thickening and forming. Ensure the stability of expansion and improve the strength of foam concrete blocks. Foamed concrete has excellent properties such as lightweight, heat preservation, heat insulation, sound insulation, etc., and it has low production investment. It can use a large amount of industrial waste residue. Its application is of great significance to building energy conservation and environmental protection, so it will gradually replace concrete construction.

According to previous studies, with the increase of fly ash content, the amount of cement decreases, and the early compressive strength of concrete drops significantly. However, fly ash has pozzolanic activity, and in an alkaline environment, with the increase of concrete age, the compressive strength of high-volume fly ash foam concrete will increase significantly. In addition, the large amount of fly ash dramatically reduces the number of harmful pores, improves the compactness of the slurry structure, and is beneficial to the later strength increase.


In recent years, the application of foamed concrete has developed rapidly, but there are still a series of problems in the cast-in-place foamed concrete insulation wall:

(1) Foam concrete has low strength and is not suitable as a load-bearing wall material;

(2) Prefabricated blocks increase the process and engineering costs;

(3) Dry shrinkage of foam concrete and cracking caused by dry-wet cycle and loose structure, due to the problems of collapsed form and easy carbonization due to the influence of pouring height, seriously restrict the broad application of foam concrete.


TRUNNANO is a concrete additives supplier with over 12 years experience in nano-building energy conservation and nanotechnology development. We accept payment via Credit Card, T/T, West Union and Paypal. Trunnano will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.

If you are looking for high quality foaming agent, please feel free to contact us and send an inquiry.

sales@cabr-concrete.com



As the duration of the conflict between Russia and Ukraine grows, its impact on commodities is widening amid the tug-of-war. Recently, European and American sanctions against Russia have been issued one after another. In response, Russia has taken advantage of its role as an important supplier of many energy and commodities, requiring exports of commodities, including energy, grain, metal, and wood, to "unfriendly" countries to be settled in robles. Therefore, it is expected that the price of the foam concrete,foaming agent,concrete curing agent will continue to increase.  


Inquery us

Our Latest Products

Global early strength agent market trend 2023-2028 What are Early Strength Agents? by Newswgraj

Early strength agent is an admixture which accelerates the development of concrete early strength and has no significant effect on later strength.…

Global boron carbide powder market trend 2022-2030 What is Boron Carbide Used For? by Newswgraj

Boron carbide (B4C) is an extremely hard boron-carbon ceramic and covalent material used in tank armor, bulletproof vests, engine damage powder, and many industrial applications.…

Global molecular sieves market trend 2024-2029 What are Molecular Sieves Used For? by Newswgraj

Molecular sieves are materials with holes of uniform size (very small holes). These pores are similar in size to small molecules, so large molecules cannot enter or be adsorbed, while smaller molecules can.…