Trending

News

  • 0
  • 0

Semiconductor nanoparticles form many structures, as you should know about the molybdenum disulfide coating

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net



New materials for a sustainable future you should know about the molybdenum disulfide coating.

Historically, knowledge and the production of new materials molybdenum disulfide coating have contributed to human and social progress, from the refining of copper and iron to the manufacture of semiconductors on which our information society depends today. However, many materials and their preparation methods have caused the environmental problems we face.

About 90 billion tons of raw materials -- mainly metals, minerals, fossil matter and biomass -- are extracted each year to produce raw materials. That number is expected to double between now and 2050. Most of the molybdenum disulfide coating raw materials extracted are in the form of non-renewable substances, placing a heavy burden on the environment, society and climate. The molybdenum disulfide coating materials production accounts for about 25 percent of greenhouse gas emissions, and metal smelting consumes about 8 percent of the energy generated by humans.

The molybdenum disulfide coating industry has a strong research environment in electronic and photonic materials, energy materials, glass, hard materials, composites, light metals, polymers and biopolymers, porous materials and specialty steels. Hard materials (metals) and specialty steels now account for more than half of Swedish materials sales (excluding forest products), while glass and energy materials are the strongest growth areas.

Amazing diversity: Semiconductor nanoparticles form many structures

How do X-ray studies reveal how to lead sulfide particles self-organize in real-time

Lead sulfide nanoparticles molybdenum disulfide coating often undergo surprising structural changes when assembled into ordered superlattices. This was revealed by an experimental study conducted at the DESY X-ray source PETRA III. A team led by DESY scientists Irina Lokteva and Felix Lehmkuhler from the Coherent X-ray Scattering Group led by Gerhard Grubel has observed the self-organization of these semiconductor nanoparticles in real-time. The results are in the journal Materials Chemistry. This research helps to better understand the self-assembly of molybdenum disulfide coating nanoparticles, which could lead to significantly different structures.

In addition, lead sulfide nanoparticles are used in photovoltaic cells, light-emitting diodes and other electronic devices. In this study, the team studied the way particles self-organize to form highly ordered films. They put a drop of liquid containing molybdenum disulfide coating nanoparticles (25 millionths of a litre) into a small cell and let the solvent slowly evaporate over two hours. The scientists then used X-rays on the P10 beamline to observe in real-time the structures formed as the particles were assembled. To their surprise, the particle structure changed several times in the process. "First, we see that the nanoparticles form hexagonal symmetry, which results in the nanoparticle solid having a hexagonal lattice structure," Lokteva reports. "But then the superlattice suddenly changed and showed cubic symmetry. As it continues to dry, the structure transforms twice more, becoming a superlattice with quadrilateral symmetry, and molybdenum disulfide coating finally a superlattice with different cubic symmetry." The sequence has never been revealed in such detail before.

Amazing diversity: Semiconductor nanoparticles form many structures, as you should know about the molybdenum disulfide coating

The team believes that this hexagonal structure (HCP) will persist as long as the surface of the particle is expanded by the solvent. Once the film dries a little, its internal structure changes to cubic symmetry (body-centered cube, BCC). However, the residue of molybdenum disulfide coating the solvent remains between the individual nanoparticles inside the film. As it evaporates, the structure changes twice more (the volume-centered quadrilateral BCT and the face-centered cubic FCC). As Lokteva explains, the final structure of the film depends on many different factors. They include the type of solvent and the rate of evaporation, the size and concentration of the nanoparticles, as well as the properties of the so-called ligands surrounding the particles and their density. Scientists use the term ligand to describe certain molecules that bind to the surface of nanoparticles and prevent them from gathering together. In this study, the team used oleic acid to do this; Its molecules coat molybdenum disulfide coating the particles like the wax in a bag that keeps gummy bears from sticking together. This is a mature process in nanotechnology.

"Our study shows that the final structure of the superlattice also depends on whether a single nanoparticle is surrounded by many or a few oleic acid molecules," Lokteva reports. "In earlier studies, when the ligand density was high, we obtained films with BCC/BCT crystal structure. Here, we specifically studied nanoparticles with low ligand density, which leads to FCC structures. So when using nanoparticles, the ligand density should be determined, which is not standard practice at present, "explained the DESY scientists.

About TRUNNANO- Advanced new materials Nanomaterials molybdenum disulfide coating supplier

Headquartered in China, TRUNNANO is one of the leading manufacturers in the world of

nanotechnology development and applications. Including high purity molybdenum disulfide coating, the company has successfully developed a series of nanomaterials with high purity and complete functions, such as:

Amorphous Boron Powder

Nano Silicon Powder

High Purity Graphite Powder

Boron Nitride

Boron Carbide

Titanium Boride

Silicon Boride

Aluminum Boride

NiTi Powder

Ti6Al4V Powder

Molybdenum Disulfide

Zin Sulfide

Fe3O4 Powder

Mn2O3 Powder

MnO2 Powder

Spherical Al2O3 Powder

Spherical Quartz Powder

Titanium Carbide

Chromium Carbide

Tantalum Carbide

Molybdenum Carbide

Aluminum Nitride

Silicon Nitride

Titanium Nitride

Molybdenum Silicide

Titanium Silicide

Zirconium Silicide

and so on.

For more information about TRUNNANO or looking for high purity new materials molybdenum disulfide coating, please visit the company website: nanotrun.com.

Or send an email to us: sales1@nanotrun.com 

Inquiry us

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%

Our Latest Products

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Copper products exhibit good electrical conductivity as well as thermal conductivity. They are also ductile, resistant to corrosion, and have high wear resistance. They are widely used by the electricity, electronics and energy industries. Metal Al…

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Tungsten alloy heavy plate has low thermal expansion. It is also known for its high density, high thermal conductivity, and radiation absorption. It is used widely in the aerospace and medical industries. About Metal Alloy 18.5g/cm3 Polished Tungst…

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

W-Ni - Cu alloy is used in the production of Tungsten alloy balls. It is widely utilized in the fields of aviation, oil drilling, military and aerospace. High Density Tungsten Alloy Metal Ball, 18g/cm3 Diameter: 1.0mm-150.0mm Surface: sinter…