High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

CuO is the chemical name for copper oxide. Copper oxide is a black copper oxide with a slightly amphoteric, and slight hygroscopic chemical formula. Its relative molecular mass of 79.545 is 66.36.9g/cm3, its density is 6.6.36.9g/cm3, while the melting point for copper is 1026. Purity: 99.5%
Pebble size: 40nm,200n

Cuprous Oxide CuO powder:
Copper oxide states : The oxidation state of Copper is +1 or +2.
Copper (II) Oxide is an organic substance with CuO. It is a dark copper oxide, somewhat amphiphilic but slightly hygroscopic. Copper oxide has a weak base.
Black copperoxid is CuO. Red copperoxid Is Cu2O.
Copper oxide can be almost insoluble when mixed with water and alcohols. However, copper oxide disintegrates slowly in ammonia but fast in ammoniumcarbonate solution. The alkali-metal cyanides and strong acids dissolve it quickly.

Copper Oxide is used primarily to produce rayon, glaze, enamel, candles, petrol desulfurizes pesticides, batteries and hydrogen production.
CuO is produced large-scale by pyrometallurgy. It is an intermediate step in the extraction of copper from ore. An aqueous mixture containing ammonium carbonate (ammonia) and oxygen is applied to the ore. This results in copper (I) and (II), amino complexes that are then extracted from the solid. The steam is used to decompose these complexes and produce CuO.
The precursor to many copper-containing products like ceramics and wood preservers is cupric oxide. Cupric oxide is found in varying amounts in the average daily intake for adults. Copper(II), oxide nanoparticles (NPCuO) are useful in the industrial sector as antimicrobial agent in textiles, paints, and catalysts for organic synthesis. You can also make them from electronic scraps. Because cupric oxide is toxic, muta and generates reactive oxygen compounds, it can cause potential health and environmental problems.

Copper oxide for sale:
To receive the most recent copperoxide price, please feel free to submit an inquiry.

Performance Copper Oxide CuO Pulp:
Copper oxide is not soluble or soluble with water and alcohol. It can also be soluble in acids, ammonium chloride, potassium cyanide, and acid. The copper oxide can react with many bases and slowly dissolves in ammonia solutions. The main uses of copper oxide are to make rayon, ceramics glaze and enamel as well batteries, petroleum desulfurizes. Insecicides, hydrogen production catalysts, etc.

Technical Parameter Copper Oxide CuO powder:

Product

The Nuclear cdh857 CuO powder is 200mesh

Chemical Property (%)

Physical Property

CuO

So42

Fe

Cl

Ni

Pb

Loose Density (3g/cm3)

Dimensions in Part

(mesh)

Form

99.27

0.08

0.022

0.013

0.0024

0.04

1.54

-200

Powder


What is Copper Oxide CuO Powder made of?
There are many methods for industrial copper oxide production
1. Copper powder oxidation technique
Copper ash, copper slag are used as raw materials. They then undergo preliminary oxidation with coal gas. The heat is to evaporate moisture from the materials and remove organic impurities. It is then naturally cooled and pulverized to make crude copper oxide. After adding the crude copper dioxide to the reactor, it is heated and stirred until the ratio of liquid to sulfuric acid doubles. At that point, the pH value of the solution will be 2 or 3. Under heating and stirring, copper oxide can be added to the reactor. After that, it is washed in hot water with no iron or sulfate. Centrifugal separation is followed by drying and oxidation roasting at 350°C for 8 hours. Cooling, crushing to 100 meshes then oxygenation in an oven to produce copper oxide powder.
2. Nitration copper wire, copper powder
The copper wire and copper powder should be dissolved in 6mol/L Natric Acid to prevent the copper from being in excess. To remove iron hydroxide precipitate, raise the pH to 3-4. Mix the solution with 10% (massive) sodium carbonate to bring it to boiling. After alkaline salt has precipitated, remove the supernatant and wash well with water. Filter it then dry. The dried basic copper carbonate is heated and decomposed into black copper oxide powder under a small fire with sufficient stirring: CuCO3*Cu(OH)2=2CuO+CO2|+H2O
Once no more carbon dioxide has been produced, decomposition will be complete.
3. Thermal decomposition of copper nitrate
Dilute nitric acids is used to dissolve the electrolytic copper. It's then evaporated on a water bath to dry it, before being heated slowly in a desiccator between 90 and 120 degC. After the formation of soft basic salt, it must be boiled with water and filtered to dry. Next, heat it to 400 for most of its nitric oxide. Finally, crush it to make oxidation copper. You can further enhance the process by pulverizing the product again and heating it at 700°C for about an hour. Then, place the product in a desiccator to cool.
4. Conductive water dissolution method
Use conductive water to dissolve high-purity copper Nitrate. Filter the solution, then add extra high-purity NaH3*H2O. After filtering, you can use high purity nitric to neutralize the filtrate. This will precipitate copper hydroxide. Filter, use conductive water to wash the filtrate once, then add high-purity ammonium Carbonate to precipitate coppercarbonate. After drying, turn off the oven and dry at 200 degrees Celsius for about 3-4 hours.
5. Method for thermal decomposition copper carbonate
For complete dissolution, place copper wire and powder in a fume hood containing as much 6mol/L Nitric Acid as you are able to. Filter the solution if it is too opaque. To create black basic salt precipitation, sodium carbonate is boiled with the copper solution. After the solid has settled completely, drain the excess liquid and filter it. Dry by decantation. Place it in an evaporating tray and heat on a small flame with enough stirring to turn it into copper oxide.

Copper Oxide Uses:
Copper(II) Oxide is an important product of copper mining. It's the base for production of other copper salts. Many wood preservers, for example, are made from copper oxide.
Cupric oxide is used to make ceramics in the colors blue, red and green. Sometimes, gray, pink or black glazes are also produced.
Also, it is not recommended to be used in livestock feeds as an dietary supplement. Copper is not absorbed due to its low bioactivity.
It can also be used for welding copper alloys.
An early form of the Edison-Lalande type battery included a copper dioxide electrode. Copper oxide could also be used to make a type of lithium battery.
Copper(II)oxid can also be used in catalysis and superconductivity; ceramics; catalyst carriers; electrode activity material;
glass, colourants of porcelain, polishing agent for optical glasses, oil to desulfurize; propellant rocket fuel speed catalyst.

CuO Powder in Storage:
CuO Powder of Copper Oxide CuO should be kept in a dry, cool, and sealed environment. It should not be exposed to the air.

Shipping and Packing of Copper Oxide CuO powder:
You can pack it in two plastic bags with the inside.
Packaging of copper oxide cuO powder in vacuum packaging, 100g to 500g or 1kg/bag at 25 kg/barrel. Or as you request.
Copper Oxide CuO powder shipping shipping: can be sent by sea or air as soon as payment receipt is received.



Designerstudiostore advanced material Nano Technology Co. Ltd. (Designerstudiostore) is a trusted global chemical material supplier & manufacturer with over 12-year-experience in providing super high-quality chemicals and Nanomaterials, including boride powder, nitride powder, graphite powder, sulfide powder, 3D printing powder, etc.
Send us an enquiry if you're looking for copper oxide powder of high quality. (brad@ihpa.net)

Copper Oxide CuO Powder Properties

Other Titles Copper (II) oxide, Copper monooxide, Cupric oxide, Copporal, Oxocopper,
Copacaps, Paramelaconite Cuprousoxide, Copper Brown and Black copper oxide
Boliden Salt K-33, Copper oxygen(2-), Ketocopper, cu2-ox-02-p.05um
1317-38-0
Compound Formula CuO
Molecular Weight 79.55
Appearance From black powder to brown powder
Melting Point 1,201deg C (2,194deg F)
Solubility In Water N/A
Density 6.31 g/cm3
Purity 99.50%
Particle Size 40nm, 200nm
Bold point 2,000deg C (3,632deg F)
Specific Heat N/A
Thermo Conductivity N/A
Thermal Expansion N/A
Young's Module N/A
E Mass 78.9245 g/mol
Monoisotopic 78.924516 D

Copper oxide CuO powder Health & Safety Information

Safety Notice Alert
Hazard Statements H400-H412
Flashing Point N/A
Hazard Codes Xn,N
Risk Codes 22-50/53
Safety statements 60-61
RTECS # GL7900000
Transport Information UN 3077 9 / PGII
WGK Germany 3

Inquiry us

NEXT Oxide Powder

Our Latest Products

High Purity Copper Oxide CuO powder CAS 1317-38-0, 99.9%

CuO is the chemical name for copper oxide. Copper oxide is a black copper oxide with a slightly amphoteric, and slight hygroscopic chemical formula. Its relative molecular mass of 79.545 is 66.36.9g/cm3, its density is 6.6.36.9g/cm3, while the meltin…

High Quality Water-Based Boron Nitride Emulsion

A water-based, organic high-temperature lubricating product is the water-based Boron Nitride Emulsion. It doesn't bond with or infiltrate molten metallic liquids and it can protect surfaces of ceramic utensils or other refractory material. About Wa…

High Purity Calcium Silicide CaSi2 Powder CAS 12013-56-8, 99%

Calcium silicide (also known as calcium diilicide) is a chemical formula that is CaSi2. CaSi2 calcium silicide powder is used to make steelmaking deoxidation. Purity: 99%Particle Size: 5-10um Calcium Silicide CaSi2 Pulp : Calcium silicide (als…

0086-0379-64280201 brad@ihpa.net skype whatsapp