EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe for the environment, is not toxic, isn't polluting and is non-hazardous. This product can be used to make inks, paints, and leather coatings.
Particle Size: D50: =2mm
Product name: Ethylene bis stearamide emulsion
Formula: C38H76N2O2
Products property
This product was produced using modern technology. The appearance of the product is white emulsion. This product is not toxic, polluting, hazardous, or harmful to the environment. The product is very easy to disperse into water. It has a low viscosity and ultra-fine texture.
EBS Ethylene bis Stearamide
Emulsion
:
EBS Ethylene Bis Steramide is a cream-colored lotion. Ebs Ethylene Bis Steramide, a high-melting point white wax with a very hard melting point, is nontoxic. The industrial products have small yellow particles. They are stable in water and acid-base solvents. This powder contains soluble hydrocarbons as well as aromatic hydrocarbon solvents. The compound has wettability in water of 80°C or more.
EBS stands for Ethylene-bis Steramide. This synthetic wax has a high melting point and is highly compatible with most thermoplastics. The best pigment dispersants for the finished product are the outer and lubricants.
Ebs Ethylene Bis Steramide a plastic lubricant is new and widely used in PVC products. The stearate has a better internal lubrication and external lubrication that lubricants, like polyethylene wax. Plastic molding is improved by the fluidity of the fused plastic. This allows for increased yields and lower energy consumption. Additionally, it has excellent smoothness and surface finish. Send an inquiry for the most current price to purchase bulk EBS Ethylene Bis Stearamide Emulsion.
Ethylene Bis stearamide Emulsion properties:
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, and non-polluting. It can be easily dispersed in water.
It is simple.
EBS Ethylene Bis Stearamide
produced?
You can divide EBS's synthesis technique into 4 routes.
Combining amines and stearic acids to make stearic acid
Reacting with an amine compound to the stearate react is called "stearate"
The hardy amine and chloride compounds are not recommended.
Hydrolysis of the nitrile.
First and second are most common. The first is the most common. It is straightforward, requires no reaction conditions, has three disruptions but is low in purity. Although the EBS is large, the process can consume a lot of energy and is lengthy.
Use of
EBS Ethylene Bis Stearamide
Emulsion
:
EBS Ethylene Bis Stearamide Emulsion, a white emulsion. It is safe, effective, environmentally-friendly, non-polluting and non-hazardous. It can be easily dispersed in water.
1.Plastic
There are many types of thermoplastic and thermoset polymers that can be used as sliding agents. These include ABS, PS and AS. They also come in PP, PVAC and Cellulose. Accurate, Nylon, and PP. Amino plastic, Phenolic resin, and others have excellent finishes.
An auxiliary agent can also be used as an internal release agent in thermoplastic PUR molding. The amount of the agent is between 0.1 and 1%.
Polymethylene gulf agents add 0.5% of additional, increasing melt flow rates and whiteness. The thermal stability, physical indicators and physical indicators for polyoxymethylene also increase.
2. Rubber
EBS, synthetic rubbers and polychloroprene (SBR) include 1 to 3 percent EBS in the emulsion. They have excellent anti-sticky and anti-blocking qualities. EBS is also applied to automotive flooring mats, drain pipes, and other rubber products. This has an added effect on surface gloss.
3. Chemical fiber
EBS increases the heat resistance, fluidity, and antistatic properties of polyamide fibers.
4. Type
Casting sand can be added to a phenol-based resin in order to include EBS as an example agent.
5. Pigment, filler dispersant
EBS can be used as a plastic. Chemical fiber parent: ABS, PS. Polypropylene. Polyester pellets.
EBS can be used to color plastics with a spread of powdered EBS.
The pigment filler amount determines how much is added.
6. Powder coating
EBS can also be used to aid in the preparation of powder coatings.
7. Coatings, inks
To improve the performance of paints and paints, you can add 0.5% - 2% EBS.
You can use it in furniture polishing agents or printing inks.
8. Uses other than those listed
The melting point of petroleum products
Lubricants and corrosion inhibitors during the metal wire. Potting materials for electric components.
Below the papermaking agent, and above the paper coating components
You can dye textile dyeing as both a dyeing engineer defoamer or a permanent water-drawing agent.
You can add this product to asphalt. This will lower the asphalt's viscosity and improve its weather resistance.
Technical Information of Ethylene bis Stearamide Emulsion
|
Product
|
EB-20
|
|
Solid content. %
|
20+-2
|
|
Cps, viscosity
|
<=100
|
|
Particle Size D50
|
<=2um
|
|
PH
|
7-9
|
Shipping and Packing of Ethylene Bis stearamide emulsion
There are many options for packing depending on Ethylene Bis Stearamide Emulsion quantities.
Ethylene Bis Stearamide Emulsion packing:
25kg/barrel or at your request
Ethylene Bis Stearamide Emulsion shipping:
Could be sent by sea or air as soon as possible after receipt of payment.