Water-reducing agent solution for these three

If you are looking for high-quality products, please feel free to contact us and send an inquiry, email: brad@ihpa.net

The water-reducing agent should be used with concrete admixtures to reflect the water-reducing effect. Cement quality is therefore a direct factor of the actual water-reducing agents.

If you encounter different types of "problem" cements, different strategies will be required.

High alkali cement

High-alkali is a cement type with a large amount of alkali. Alkali in high-alkali is usually higher than that in conventional cement.

The high-alkali cements have a high degree of alkalinity. This can impact the performance. High-alkali Cement can encourage the setting reaction, which is beneficial to the early development of strength in concrete. High-alkali Cement can also increase the fluidity of cement, making it more workable and easier to pump.

But there are also some issues with high-alkali clinkers. As an example, high alkali cements can reduce the efficiency of water-reducing agents and cause concrete to lose its slump faster. High-alkali cement may also lead to corrosion and carbonation problems in concrete.

High-alkali Cement can benefit from water-reducing agents that contain a higher content of sodium sulfate. High-alkali cement contains a high amount of alkali, which accelerates C3A's dissolution. Sodium sulfate reacts with C3A, forming AFt crystals. This can improve the fluidity in cement mortar.

Low-alkali sulfur-deficient cement

Low alkali-sulfur cement is a cement with a lower sulfate level than normal cement. Ordinary cement is high in sulfate. It reacts with water and the sulfate forms crystals that cause cracking.

Reduced sulfate cements reduce the alkali silica reaction (alkali-aggregate) in concrete. Alkali and silicate react in concrete to produce expansion and cracking. The use of low-alkali cements that are sulfur-deficient can help reduce this reaction, and increase the durability and life of the concrete.

Due to the lower sulfate contents, water reducers work less well with low alkali-sulfur cement. Water-reducing agents can cause concrete to lose slump quickly if they are used in excess. In this case, the conventional method of using water-reducing agents may not work. Instead, it is best to choose a water reducing agent that contains sulfate.

High C3A Content Concrete

Cement with a high C3A-content is one that has a higher content of C3A. C3A is a mineral present in cement, which reacts to water and forms an expanding substance during cement hydration. Cements with a high C3A percentage have a faster setting time and higher early strength. They are ideal for projects requiring rapid strength development and rapid setting.

Cement with high C3A levels can cause some problems. C3A and sulfate react to form sulphoaluminate. This can cause concrete to expand or crack. In humid environments, cements high in C3A are susceptible to producing corrosive calcium-sulfate precipitates, which can have a negative impact on the durability of concrete and steel structures.

Cement containing high C3A has greater adsorption, which can reduce fluidity and slump. If you are using a water water-reducing Agent, choose a water-reducing Agent containing high Sulfate content or a retarder that has hydroxycarboxylate in order to reduce C3A adsorption and improve concrete fluidity.

There are two types of products that reduce water: a water-reducing naphthalene agent and a water-reducing polycarboxylic agent. The main difference in water reduction is the naphthalene. It is high-performance, while polycarboxylic is high-efficiency. For general foam concrete, the naphthalene cubic addition is between a few hundred grams and a kilogram.

Inquiry us