Trending

What is CLC Physical and Chemical Foaming Agent?

There are two general cement-based foaming materials, chemical foaming and physical foaming.…

More>>

Different Types of Foaming Agents (3)

In the last article, the physical foaming agents of hydrocarbon foaming agents and hydrofluorane (HFC) foaming agents have been mentioned. In this article, the chemical foaming agents of OBSH and DPT will be talked about.…

More>>

Different Types of Foaming Agents (4)

In this article, the chemical foaming agents of ADC will be talked about.…

More>>

What are the types of foam concrete foaming agents

The foamed concrete foaming agent can make concrete appear a lot of foam to accelerate the formation and use of foamed concrete. Use efficiency and speed up the progress of the entire construction project. Foamed concrete foaming agents are available…

More>>

TR30 CLC Foaming Machine Concrete Foam Generator

TR30 foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR30 foam generator are low foam moisture content,…

More>>

Polyvinyl Alcohol Fiber PVA Fiber for Concrete

The main characteristics of PVA fiber are high strength, high modulus, low elongation, abrasion resistance, acid and alkali resistance, good weather resistance. It is good affinity and bonding with cement, gypsum and other substrates. It is non-toxic…

More>>

Polypropylene Fiber PP Fiber Concrete

Polypropylene PP fiber has the advantages of high strength, good toughness, good chemical resistance and antimicrobial resistance, and low price, so it is widely used in ropes, fishing nets, safety belts, luggage belts, safety nets, sewing threads, c…

More>>

What is Prestressed Concrete

Prestressed Concrete is a kind of concrete component mainly used in construction engineering and bridge engineering.…

More>>

Introduction to Concrete Additives (2)

In this article, the set retarder, the air-entraining agent, and the accelerating agent are going to be talked about.…

More>>

Concrete Early Strength Agent

The early-strength agent can greatly change the final setting time while ensuring the quality of concrete is reduced. It is changed to demoulding as soon as possible. The sleeve accelerates the turnover of the formwork, saves the amount of formwork,…

More>>

What is micro silica fume for concrete

Micro silica fume is also well used in the concrete industry. Its physical characteristics include small particles, high purity, and pozzolanic solid activity. Adding micro silica fume to concrete can not only improve the properties of concrete in ma…

More>>

Concrete Crack Reducing Admixture

Using the right admixtures (or synergistic mixtures) to prevent or reduce the effects of cracking will extend the service life of concrete and lead to better performance. Using the filters below, you can identify the type of crack and better understa…

More>>

Related news

Fumed Alumina Fumed Aluminum Oxide Al2O3 Powder

Fumed Alumina can be used in flow aids, as anti-adhesion for PET film, fluorescent tube, and lightbulbs, as well as as an environment-friendly powder coating to protect and bond. Purity: >=98% Fumed Alumina Fumed Alkyl Oxide Alumina (also known a…

More>>

Sodium oleate CAS 143-19-1, 98%

The oxidation of sodium oleate in the air can cause a darkening and rancidity. It is easily soluble in water. Content: 98% About Sodium oleate The oleate salt can slowly oxidize in the air and darken its color. It is soluble in water and its aque…

More>>

What are the differences between CrN and Cr2N?

Brazil, the world's largest sugar producer, has recently switched to ethanol chromium nitride price is predicted to go higher in the future. What is chromium nitride?Metal chromium and nitrogen can form metal chromium nitride with differe…

More>>

Metal Alloy 8.92g/Cm3 High Purity Polished Copper Plate

Metal Alloy 18.5g/cm3 Polished Tungsten Heavy Alloy Plate

Metal Alloy 18g/cm3 High Density Tungsten Alloy Ball

High Purity Molybdenum Boride MoB2 Powder CAS 12006-99-4, 99%

Metal Alloy High Density Tungsten Alloy Rod Grind Surface Tungsten Alloy Bar

High Purity Germanium Sulfide GeS2 Powder CAS 12025-34-2, 99.99%

High Purity Tungsten Silicide WSi2 Powder CAS 12039-88-2, 99%

High Purity Titanium Sulfide TiS2 Powder CAS 2039-13-3, 99.99%

High Purity Calcium Nitride Ca3N2 Powder CAS 12013-82-0, 99.5%

High Purity Nano Hafnium Hf powder CAS 7440-58-6, 99%

High Purity Nano Ag Silver powder cas 7440-22-4, 99%

High Purity 3D Printing Nickel-based Alloy IN738 Powder

High Purity Chromium Diboride CrB2 Powder CAS 12007-16-8, 99%

High Purity Silicon Sulfide SiS2 Powder CAS 13759-10-9, 99.99%

Supply Magnesium Granules Mg Granules 99.95%

High Purity 3D Printing Powder 15-5 Stainless Steel Powder

High Purity 3D Printing 304 Stainless Steel Powder

High Purity Zirconium Nitride ZrN Powder CAS 25658-42-8, 99.5%

High Purity Tungsten Boride WB2 Powder CAS 12007-09-9, 99%

High Purity Silicon Nitride Si3N4 Powder CAS 12033-89-5, 99%